16
Solution to Operational Problems
cont.
4.3 Jamming
- Ensure there are no foreign objects that could accidentally fall into the
equipment (clip, tape, etc. )
- To avoid jamming the bills, position them correctly in the feeding channel.
- Make sure the bill does not have adhesive tape.
- The bill cannot be very wrinkled or torn.
- If any bill or other object accidentally jams inside the detector:
1. Turn off the detector immediately.
2. Open the top cover of the detector.
3. Carefully proceed to remove the bill or object causing the problem.
4. Turn on the detector again and verify it is working at an optimum level.
To Next Page
Loading...
