AccuCut MARK IV User Manual (English)

Need help?

Do you have a question about the AccuCut MARK IV and is the answer not in the manual?

AccuCut MARK IV Specifications

General

Brand	AccuCut
Model	MARK IV
Category	Cutter
Language	English

Summary

SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

Installation Instructions: Setup of Machine and Die Center

Where to Place Machine

Positioning the AccuCut machine on a stable surface for optimal use.

Where to Position Die Tray

How to Place Paper or Other Material on an AccuCut® Die

Operating Instructions

Three Easy Steps for Perfectly Cut Letters and Shapes

A three-step guide for operating the AccuCut machine to achieve precise cuts.

User-Maintenance Instructions

Replacement Parts

How to Replace the AccuCut Roller

Step-by-step instructions for removing the old roller and installing a new one.

User-Maintenance Instructions (cont'd)

Cleaning Dies

Instructions on cleaning dies using a die pick and lint roller to maintain performance.

Cleaning the AccuCut Machine

Steps for cleaning the machine's top roller and bottom rollers.

Troubleshooting

Blades are not cutting all the way through paper or other material as you roll it through the machine.

Addresses issues with blades not cutting completely through material and provides multiple solutions.

Troubleshooting (cont'd)

Die will not go under roller or is stuck under roller and won't move.

Guides on resolving problems where the die gets stuck or won't move through the machine.

The handle is loose or has come off.

Instructions for tightening a loose handle or ordering a repair kit if it has fallen off.

Fabric or felt is getting stuck to the roller.

Advice on preventing fabric or felt from sticking to the roller and how to clean it off.

AccuCut MARK IV User Manual

Table of Contents