AccuCut User’s Manual
USER-MAINTENANCE INSTRUCTIONS (CONT’D)
9
DIE PICK
USING LINT ROLLER TO CLEAN A DIE
USING PICK TO CLEAN A DIE
Wood dies have a three-year warranty. Some
AccuCut dies are made using see-through acrylic
instead of wood. These dies are called Clear Cuts
™
dies and have a two-year warranty.
User-Maintenance Instructions (cont’d)
Cleaning Dies
AccuCut dies make as many as a million cuts! To keep dies in good working order, keep blade and
foam free from lint and scraps. A die pick is provided with your machine especially for this purpose.
Keep the surface of the foam clean by rolling off lint and tiny scraps with an adhesive-style clothes
brush or lint roller.
To keep dies clean, use die pick gently to remove scraps
caught in tight areas between blades.
Remove lint and tiny scraps from surface of foam with a
purchased clothes brush or lint roller.
This is a die pick (Item PA710). Keep die pick in
protective sleeve when not using.
NOTE: To care for
AccuCut dies, store
properly. See page 2
for storage tips.
To Next Page
Loading...