USER-MAINTENANCE INSTRUCTIONS (CONT’D)
10
TOP ROLLER
Step 1: Removing Safety Guard
Step 3: Replacing Safety Guard
Step 2: Wiping Roller
BOTTOM ROLLERS
Spray and Wipe
User-Maintenance Instructions (cont’d)
Cleaning the AccuCut Machine
To clean top roller, first gently squeeze and lift safety
guard.
Spray white rollers with Bio-T
®
Foamaxx Cleaner
(Item TSC1040), or another all-purpose cleaner, then
wipe clean.
Wipe top roller with a clean, dry rag—or brush away
small scraps.
Replace safety guard by squeezing gently and lowering
into place, making sure edges slide inside of pins.
Pin
To Next Page
Loading...