8
Purpose
This application program allows you to obtain weight readouts in percent which are in proportion to a reference weight.
Example: Determine an unknown percentage; store the weight on the balance/scale as the reference percentage (100%)
Step Key (or instruction) Display
1. Select application program (ZERO) > 2 sec
2. Select Weighing in Percent (F) repeatedly
3. Confirm setting (ENTER)
Symbol “ “ on the display: application is active
4. Place empty container on the balance/scale
5. Tare the balance (ZERO)
6. Place the reference weight for 100% on the
balance/scale
7. If desired, change the number of decimal places
displayed:100.0%,100.00% or 100% (factory setting) (F) repeatedly
8. Confirm selected no. of decimal places (ENTER)
9. Place unknown weight on the balance/scale
10. Toggle display between weight and percentage (F) repeatedly
11. Unload the balance/scale
12. Weighing in Percent application:
clear the reference percentage (ENTER) > 2 sec
13. Reactivate Weighing in Percent (if no other (F)
application program has been selected)
14. Repeat procedure starting from Step 5.
Weighing in Percent
To Next Page
Loading...
