Accumax SMART - User Manual

Questions and Answers

G
Gabriel WheelerAug 5, 2025
Why is my Accumax Laboratory Equipment pipette leaking?
- A
  Amanda EverettAug 5, 2025
  If your Accumax Laboratory Equipment pipette is leaking, it could be due to several reasons. The O-ring or seal might be worn and need replacement. Alternatively, there might be foreign particles lodged between the tip and tip cone, in which case you should clean the tip cone and attach a new tip. Another possibility is contamination between the piston and seal, requiring you to clean both the seal and the piston.
M
Melissa KleinAug 12, 2025
What to do if my Accumax SMART pipette won't aspirate?
- A
  amber18Aug 12, 2025
  If your Accumax Laboratory Equipment pipette won't aspirate, several factors could be at play. A worn O-ring or seal could be the culprit, necessitating replacement. Check if the tip cone is loose and tighten it if necessary. If the piston is damaged either chemically or mechanically, return the pipette to an Authorised Distributor. Lastly, a damaged tip cone can prevent aspiration, so replace it if needed.
A
Anthony JacobsonAug 20, 2025
How to fix an inaccurate Accumax SMART pipette?
- J
  Jessica MejiaAug 20, 2025
  If your Accumax Laboratory Equipment pipette is inaccurate, consider these potential causes: improper assembly, which may require consulting the “Maintenance” section; a loose tip cone, which should be tightened; an incorrectly attached tip, which should be firmly attached; or an altered calibration, which necessitates recalibration according to instructions.
A
Abigail WalkerAug 27, 2025
Why is my Accumax SMART pipette dispensing inaccurately with some liquids?
- J
  Jamie Cabrera MDAug 28, 2025
  If you're experiencing inaccurate dispensing with certain liquids using your Accumax Laboratory Equipment pipette, it might be because the current calibration isn't suitable for that particular liquid. To resolve this, recalibrate the pipette using the liquid in question.