ROOF UPBLAST AND SIDEWALL EXHAUST | 5
ROOF UPBLAST AND SIDEWALL EXHAUST
ROOF UPBLAST AND SIDEWALL EXHAUST
OFFER THE FOLLOWING BENEFITS:
• Industry’s best performance and durability for general clean
air, high grease and other contaminant applications (as found
in food service and fume hood exhaust)
• All fan sizes are tested in our AMCA Accredited laboratory,
and all models are licensed to bear the AMCA Sound and Air
Performance seal
• Leakproof construction for the entire life of the fan, utilizing a one-piece windband trapping grease
and protecting the roof/wall
• Broadest performance in the industry, up to 5 in. wg (1,245 Pa) and 30,000 cfm (50,970 m3/hr)
• Most advanced motor cooling of any fan in its class
• Seismic Certification IBC 2015. OSHPD/OSP Certification
• Certified to High Wind and Hurricane standards. NOA and FLPA Certified
MODEL NUMBER CODE:
The Model Number Code is designed to completely identify the fan. The correct code letters
must be specified to designate belt or direct drive, and roof or sidewall mounted configurations.
The remainder of the model number is determined by the size and performance.
CONFIGURATION
XCUBE - Roof Upblast and Sidewall Exhaust Belt Drive
XCUE - Roof Upblast and Sidewall Exhaust Direct Drive
XRUD - Roof Upblast Exhaust Direct Drive
XRUBS - Roof Upblast Belt Drive (Steel)
FAN SIZE
060 through 480
WHEEL PRESSURE LEVEL
HP - High-Pressure
XP - Extended High-Pressure
(Belt Drive only)
MOTOR RPM DIRECT DRIVE ONLY
A = 1725 D = 1550
B = 1140 E = 1050
C = 860 G = 1300
MOTOR HP BELT DRIVE ONLY
4 = ¼ 10 = 1 30 = 3
3 = 15 = 1½ 50 = 5
5 = ½ 20 = 2 75 = 7½
7 = ¾
XCUBE 240 HP A/5/VG/VGD SW
MODEL OVERVIEW
Both, roof upblast and sidewall
configuration, are specifically
designed to discharge air directly
away from the mounting surface.
SIDEWALL
VG = VARIGREEN® DIRECT DRIVE ONLY
VGD = VARIGREEN® DRIVE
To Next Page
Loading...
