Accutrol AVC5000 - Page 57

Installation & Operation Manual - Model AVC5000
Contents of this Manual are Subject to Change Without Notification Page 57
Standard Object Types Supported:
Object
Create
Object
Service
Delete
Object
Service
Optional Properties
Supported
Writeable Properties
DE Device
Object
No
No
Active_COV_Subscriptions
Description
Max_Master
Max_Info_Frames
Object_Identifier
Object_Name
Description
Max_Master
Max_Info_Frames
ADPU_Timeout
Number_Of_ADPU_Retries
AI Analog
Input
No
No
COV_Increment
Object_Name
COV_Increment
AO Analog
Output
No
No
COV_Increment
Object_Name
Relinquish_Default
COV_Increment
AV Analog
Value
No
No
COV_Increment
Object_Name
Present_Value
COV_Increment
BI Binary
Input
No
No
Inactive_Text
Active_Text
Object_Name
Inactive_Text
Active_Text
BV Binary
Value
No
No
Inactive_Text
Active_Text
Object_Name
Present_Value
MSI Multi
State Input
No
No
State_Text
Object_Name
Present_Value
State_Text
Data Link Layer Options:
 BACnet IP, (Annex J)
 BACnet IP, (Annex J), Foreign Device
 ISO 8802-3, Ethernet (Clause 7)
 ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
 ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s):
 MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 76800, 115200
 MS/TP slave (Clause 9), baud rate(s):
 Point-To-Point, EIA 232 (Clause 10), baud rate(s):
 Point-To-Point, modem, (Clause 10), baud rate(s):
 LonTalk, (Clause 11), medium:
 BACnet/ZigBee (ANNEX O)
 Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with
MS/TP slaves and certain other devices.)  Yes  No