To Next PageTo Next Page
Need help?Do you have a question about the Accutrol ACCUVALVE AVC6000 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Model | ACCUVALVE AVC6000 |
| Housing Material | Polycarbonate |
| Input Voltage | 24 VAC |
| Output Signal | 4-20 mA |
| Operating Temperature | -20 to 60 °C |
| Communication Protocol | Modbus RTU |
Explains the AccuValve's airflow division and vortex shedding sensor mechanism.
Details the coding system for valve components and illustrates different AccuValve types.
Lists key performance, environmental, and electrical specifications for the AVC6000.
Details material choices and presents operating range charts for various AccuValve sizes.
Provides dimensions and weights for round AccuValve models.
Provides dimensions and weights for rectangular AccuValve models.
Outlines safety, duct preparation, and illustrates round and rectangular valve installation.
Covers control module overview, wiring instructions, and detailed wiring diagrams.
Details PC requirements, software installation, registration, and connection methods (USB/Bluetooth).
Introduces the Insight dashboard, gauges, and primary operating modes.
Guides setup for Fume Hood control: sash types, calibration, purge, alarms, and overrides.
Covers velocity adjustments, analog outputs, control parameters, and dashboard features.
Defines supported BACnet objects and their properties, and configuration methods.
Explains saving configurations, commanded points, and Change of Value (COV) notifications.
Details how to remove and replace access covers for sensor inspection on round and rectangular valves.
Lists PC requirements and guides establishing a Bluetooth connection to the AccuValve.
Outlines design criteria for setting up an AccuNet network.
Details the process for configuring AccuValves within an AccuNet network.
