Ace 16" Scroll Saw User Manual

16" Scroll Saw
Instruction Manual
Technical Data
Type/Model 2205375/60701040
Throat Depth 16 in. (406 mm)
Blade Length 5 in. (127 mm)
Max Cutting Depth 2 in. (55 mm)
No Load Speed 400-1600 SPM (Strokes per min)
Table Tilt 0-45 degrees to the left
Scroll Saw
200409rev1
Model No. 60900015
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
Products for Home Use
Manufacturuer (Seller) warrants to the original Buyer only, that each product will be free from defects in
material and workmanship for a period of one (1) year from date of purchase. SELLER’S SOLE
OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN
MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN
MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR
ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT
OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to
damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering. To
make a claim under this Limited Warranty, you must return the complete product with proof of purchase,
transportation prepaid, to any Manufacturuer's authorized service center. Call 1-888-424-3354 for the
location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if such
invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
NOTE: This product is intended for residential, non-commercial use.
Ace No. 2205375
Model No: 60701040
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Manufactured in China for
Ace Hardware Corp.
Oak Brook, Illinois 60523, USA©2009
www.acehardware.com
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.

Ace 16" Scroll Saw Specifications

General

Brand	Ace
Model	16" Scroll Saw
Category	Saw
Language	English

Summary

Limited Warranty Information

Home Use Product Warranty

Manufacturer's warranty for home use products covering defects in material and workmanship for one year.

Warranty Limitations and Exclusions

Details warranty exclusions, limitations on implied warranties, and exclusion of consequential damages.

Scroll Saw Technical Data

Specifications Overview

Lists key specifications for the scroll saw, including model, dimensions, and cutting capabilities.

General Safety Rules

Operating Safety Precautions

Essential safety guidelines to prevent electric shock and serious personal injury during tool operation.

Troubleshooting Guide

Problem Resolution

Addresses common issues like motor failure, blade breakage, and vibration with suggested solutions.

Accessories

Recommended Accessories List

Lists recommended accessories for the scroll saw, emphasizing manufacturer recommendations for safety.

Component Maintenance

Arm Bearing Lubrication

Instructions for lubricating arm bearings after initial use and periodically thereafter.

Carbon Brush Inspection

Guide for checking and replacing worn carbon brushes in the saw's motor.

Electrical Safety

Grounding Instructions

Proper grounding procedures to reduce the risk of electric shock.

Extension Cord Usage

Guidelines for selecting and using extension cords safely with the tool.

Specific Safety Rules

Scroll Saw Operation Safety

Specific safety rules for operating the scroll saw, including blade handling and workpiece support.

Maintenance Procedures

General Cleaning and Lubrication

Instructions for general maintenance, cleaning, lubricating moving parts, and storing the tool.

Blade Information and Usage

Blade Selection and Wear

Guidance on choosing, using, and understanding the causes of wear for scroll saw blades.

Speed Setting Adjustment

Instructions on how to adjust the saw's speed using the variable speed selector.

Scroll Cutting Techniques

Explanation of scroll cutting and interior scroll cutting methods.

Tool Familiarization

Component Identification

Identifies key components of the scroll saw, such as the blade tension knob and work table.

Assembly Instructions

Details on assembling the scroll saw, including the sawdust blower.

Blade Selection Criteria

Guidance on choosing the right blade type and size for different materials and cuts.

Operation and Adjustments

Saw Operation

Instructions for operating the saw's on/off switch and general cutting procedures.

Mounting the Saw

Steps for securely mounting the scroll saw to a workbench to prevent movement.

Drop Foot Adjustment

Guide on adjusting the drop foot to secure the workpiece and act as a blade guard.

Saw Table and Blade Adjustments

Squaring the Saw Table

Procedure for ensuring the saw table is perpendicular to the blade for accurate cuts.

Setting the Table Angle

Instructions on setting the saw table for horizontal or bevel cutting.

Adjusting Blade Tension

Guide on adjusting blade tension for optimal cutting performance and to prevent breakage.

Changing Saw Blades

Detailed steps for removing and replacing plain end and pin end scroll saw blades.