Ace AT Series User Manual

Section 6 – Operation
Page | 7
Applying Power
Uncoil the provided 9ft cord and plug into a
grounded 15 Amp outlet.
NOTE: Make sure the On/Off toggle switch on the
controller is in the off position prior to applying
power.
Section 6 – Operation
Power On and Speed Adjustment
To power up the Model AT Rotary Accumulation
Table place the POWER switch in the ON position.
The turntable speed may be adjusted by rotating
the SPEED CONTROL KNOB. Rotate clockwise to
increase speed and counterclockwise to reduce
speed.

Ace AT Series Specifications

General

Brand	Ace
Model	AT Series
Category	Indoor Furnishing
Language	English