EasyManuals Logo

Ace AT Series User Manual

Ace AT Series
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Page | 15
Troubleshooting
Symptoms
Corrective Action
Turntable fails to Rotate
Plug power cord into an available 120VAC
outlet.
Turn power switch to ON position.
Rotate speed control knob clockwise to
increase speed.
Verify the 120VAC outlet is operating
property.
Check/ replace controller fuse.
Lift Fails to Raise
Verify height adjustment locks loosened.
Verify lift lowering valve is tight.
Verify lift has oil in it.
Turntable Drive is Turning
but top is Stationary
Verify setscrew in table top hub is tightly
secured.
Verify setscrew has not sheared. Replace
setscrew if required.
Verify setscrew is lined up with shaft keyway.
Section 9 Contact Information
Michael Lucey
Business Unit Manager
Phone: (607) 936-1341
Email: mlucey@autocells.com
Al Herzog
Service Manager
Phone: (607) 936-1341
Email: aherzog@autocells.com
Jim Morris
President
Phone: (607) 936-1341

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ace AT Series and is the answer not in the manual?

Ace AT Series Specifications

General IconGeneral
BrandAce
ModelAT Series
CategoryIndoor Furnishing
LanguageEnglish