Ace AT Series - Section 3 - Specifications; AT24 Specifications; AT36 Specifications

Section 3 – Specifications
Page | 2
AT24
Table top
24” Diameter x 11 Ga. reinforced top. Plain steel
top surface (no finish), powder coat on underside.
Adjustable part diverter included
Turntable support
Low-friction turntable support bearings
Drivetrain
Medium duty DC variable speed drive, 1-8 RPM
complete with 9 foot 120 VAC power cord
Capacity
75 lb. part handling capacity
Frame Construction
Mild steel 2 post design with powder coat finish
and brake casters for portability
Tabletop Height
Adjustable via hand operated hydraulic jack for
16” of vertical height adjustment 29” to 45” top of
table
AT36
Table top
36” Diameter x 11 Ga. reinforced top. Plain steel
top surface (no finish), powder coat on underside.
Adjustable part diverter included
Turntable support
Low-friction turntable support bearings
Drivetrain
Medium duty DC variable speed drive, 1-8 RPM
complete with 9 foot 120 VAC power cord
Capacity
75 lb. part handling capacity
Frame Construction
Mild steel 2 post design with powder coat finish
and brake casters for portability
Tabletop Height
Adjustable via hand operated hydraulic jack for
16” of vertical height adjustment 29” to 45” top of
table