EasyManua.ls Logo

Ace LIVE - Technical Specifications; Power Output and Technology; Channel and Effects Loop Design; Valve Configuration

Ace LIVE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications
Power (RMS): 20 Watts – Ultralinear master volume technology, design to play even at very low
level.
Footswitchable two channel amp
- Canal clean fenderien chaud et claquant
- Canal lead d’inspiration JCM, précis et polyvalent
All-Tube effects loop
Valves:
- Preamp : 3 x 12AX7
- Loop : 1 x 12AX7
- Power : 2 x EL34 (switchable with 6L6 without bias setting)
Weight (kg): 7,5 – All-aluminium design
High quality components, Custom transformers
Dimensions (mm) : 370 x 200 x 200
Start well
Connect a speaker to the amp, connect the amp to the mains, plug your guitar, turn it on.
While it warm-up, set all knobs on 12 o’clock, except Clean’s Gain at 9 o’clock, and Master volume
at the minimum.
Then, adjust general volume with Master knob, which control both channels.
PLAY and enjoy 20W of pure rock.
4
English