Need help?Do you have a question about the Ace LIVE and is the answer not in the manual?
Warning about internal voltages and cautioning against opening the equipment case.
Covers safe cleaning, environmental conditions, modification, ventilation, placement, and power cord handling.
Advises users to protect hearing from high loudspeaker levels.
Directs users to qualified service personnel for operational issues.
Details 20W RMS power, Ultralinear master volume technology for low-level play.
Describes footswitchable two-channel amp and all-tube effects loop.
Lists the types and quantities of valves used in preamp, loop, and power sections.
Covers weight, construction material, and external dimensions of the amplifier.
Guides on connecting speaker, mains, guitar, and initial power-on procedure.
Recommends initial knob settings during the amplifier's warm-up period.
Explains how to use the Master Volume knob for overall sound level control.
Specifies the primary input jack for connecting a guitar.
Explains the Gain control for adjusting overdrive in the Clean Channel.
Describes the switch for selecting between Clean and Overdrive channels.
Details the Gain, Bass, and Middle controls for the Overdrive Channel.
Covers the Master Volume control and the main Power switch functions.
Details the mains power input and the connection for an external footswitch.
Explains the Send and Return jacks for connecting external effects units.
Describes the 16 Ohm and 8 Ohm speaker output connections and warnings.
To Next Page
General