13
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
• To open the OSD menu, use // / to select "Settings" in the home
screen.
• Press "ENTER" to enact it.
• When the OSD is displayed, use / to select the desired item and adjust
the settings by using / or press
"ENTER" to enter the submenu.
• Select the next item to be adjusted and adjust as described above.
• Press (BACK) to go back to previous page.
• To exit the OSD menu, press (BACK) on the remote control. It will
return to the home screen and the projector will automatically save the
new settings.
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
To Next Page
Loading...
