Acer A1P1901 Series - Page 23

14
English
WiFi
Setting
• Enable WiFi: The default value is "On". Choose "On"
to enable the WiFi connection.
• Reset: Choosing "OK" returns the display parameters
on this menu to the factory default settings.
Advanced
• Internet: Displays the available AP list. Select one AP
router to connect for Internet access.
• Password: Displays the WiFi password of this projector.
• iOS Default Mode: Sets the default mode when
performing wireless projection using an iOS device.
• Device Name (SSID): Displays the device name of this
projector.
Language
Sets a language for the OSD menus. Use / to select
your preferred language.