15
Firmware
Upgrade
• Internet:
a Connect the projector to the internet via WiFi.
b Press
"ENTER" after selecting "Internet" and
the projector will automatically search for the
latest firmware version available.
c Select YES when the projector pops out a
message to remind you that there is a new
firmware version for you.
Do not turn off the projector while the firmware is
updating.
• USB:
a Go to Acer Worldwide website and select
“Drivers and Manuals” from “Support” or
“Service”. Download new firmware files by one
compressed file.
b Copy all uncompressed files in a USB flash drive
and plug in the projector.
c Press
"ENTER" after selecting "USB" and the
projector will automatically search for the latest
firmware version available.
d Select YES when the projector pops out a
message to remind you that there is a new
firmware version for you.
Make sure that the Type-C cable is unplugged (if
applicable) before and during firmware update.
Do not turn off the projector while the firmware is
updating.
Firmware Version Displays current firmware version.
Advanced Setting
Projection Location
• Front: The factory default setting.
• Rear: Reverses the image so you can project from
behind a translucent screen.
To Next Page
Loading...
