- 28 -
R,G,B GAIN:
Adjust current RGB Driver value.
SPREAD :
Adjust chip set internal frequency spread effect for EMI testing .
Factory 2 Adjustment:
This page only visible in factory mode
AUTO BURN：
Use the chip set internal pattern for hot running monitor panel and
inverter.
AUTO COLOR ：
Perform Auto Balance measurement .
COLOR UPDATE：
Force presently R,G,B offset and gain parameters update to currently
temperature memory address.
FACTORY RESET：
Recall to factory setting and power off immediately.
Display F/W version and panel vender and DDC serial no.
LED Definition
The system equips one dual color (blue/amber) led to indict system status and defined as bellows :
System in power-off mode Dark
System in power-saving mode Amber
System in normal operation mode Blue
System Status LED Color
To Next Page
Loading...
