Acer AL2671W - Page 37

Chapter 3 51
10. Disconnect the inverter board cable one by one.
11. Disconnect the inverter board cable on the another side as shown.
12. Remove the five screws holding the inverter board.
13. Then detach the inverter board.
14. Remove the two screws that secure the LCD left bracket.
15. Detach the LCD left bracket.
16. Remove the four screws that secure the LCD lower chassis.
17. Remove the four screws that secure the LCD upper chassis.
18. Detach the LCD module from the LCD front cover. Note: The LCD module is heavy, please hold it with
enough strength.
19. Remove the four screws that secure the LCD upper chassis.
20. Detach the LCD upper chassis.
21. Remove the four screws holding the LCD lower chassis.