44 Chapter 3
Removing the LCD Bezel
1. Remove the LCD Module. See “Removing the LCD Module” on page 42.
2. Remove the four round and the two semi-rectangular screw caps.
3. Remove the six (6) securing screws.
4. Starting from the inside edges, pry the inside of the bezel upwards from the panel. Continue moving left until
the bezel is removed. If necessary, use a plastic pry to release the corners of the bezel.
5. Lift up the bezel and remove it from the LCD Module.
Step Size Quantity Screw Type
LCD Bezel M2*5 (NL) 6
To Next Page
Loading...
