97
English
English
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems may
be solved using the BIOS Setup Utility. See “BIOS Utility” on page 74 for more
informations.
Parity Check 2 nnnn* Parity error found in the I/O bus. BIOS attempts to locate
the address and display it on the screen. If it cannot locate
the address, it displays nnnn.
Press <F1> to resume, <F2>
to Setup, <F3> for previous
Displayed after any recoverable error message. Press <F1> to
start the boot process or <F2> to enter Setup and change
the settings. Press <F3> to display the previous screen
(usually an initialization error of an Option ROM, i.e., an add-
on card). Write down and follow the information shown on
the screen.
Run the I2O Configuration
Utility
One or more unclaimed block storage devices have the
Configuration Request bit set in the LCT. Run an I2O
Configuration Utility (e.g. the SAC utility).
Error Messages Corrective Action
As1600_E.book Page 97 Thursday, January 16, 2003 11:01 AM
To Next Page
Loading...
