Acer Aspire 1600 - What to Bring with You

Software86
English
Setting the Boot drive sequence
Use the cursor up/down keys to select a boot device, then press − or + to change its
order. Items with a “+” sign can be further expanded.
Note: To use the “D2D Recovery”, first enable “System Boot From Hard Disk
Recovery” (see “Advanced” on page 78), then change the boot sequence to make
D2D Recovery the first in the list. The “D2D Recovery” option is not available if
“System Boot From Hard Disk Recovery” is disabled.
Exit
This menu contains the exit options.
Parameter Description
Exit Saving Changes Saves your changes and exits the BIOS Utility.
Exit Discarding
Changes
Discards your changes and exits the BIOS Utility.
Load Setup Defaults Loads default settings for all setup parameters.
As1600_E.book Page 86 Thursday, January 16, 2003 11:01 AM