79
English
English
The table below describes the parameters in this screen. Settings in boldface are the
default and suggested parameter settings.
Parameter Description
Legacy Diskette
A:
Shows the capacity of diskette drive installed.
Primary Master Shows the Primary Master information. Press Enter to access the sub-
menu.
Secondary
Master
Shows the Secondary Master information. Press Enter to access the sub-
menu.
PCI IRQ Routing Press Enter to access and set the PCI IRQ Routing sub-menu.
Resume on LAN/
Modem Access
When enabled, resume activity upon access from LAN.
Options: Enabled or Disabled
Reset
Configuration
Data
Select Yes to clear the extended system configuration data (ESCD).
Options: No or Yes
System Boot
From Hard Disk
Recovery
When enabled, allow the system to boot from hard disk recovery.
Options: Enabled or Disabled
As1600_E.book Page 79 Thursday, January 16, 2003 11:01 AM
To Next Page
Loading...
