Acer Aspire 4339 - Thermal Module Removal; Thermal Module Installation

Machine Maintenance Procedures 3-27
Thermal Module Removal 0
Prerequisite:
Mainboard Removal
1. Find Thermal module (B) on Mainboard. Refer to Figure 3-20.
2. Loosen three (3) captive screws (A). Refer to Figure 3-24.
3. Disconnect the thermal module cable from the mainboard connector (B)
(Figure 3-24).
4. Remove thermal module from Mainboard.
Figure 3-24. Thermal Module
Thermal Module Installation 0
IMPORTANT:
+
Apply approved thermal grease and ensure all heat pads are in position
before replacing
module.
CAUTION:
!
Use caution when applying thermal grease. Thermal grease may cause
damage to the mainboard.
The following thermal grease types are approved for use:
 Silmore GP50
 Honeywell
 Jet Motor 7762
A
B