Acer Aspire 4745 - Replacing the USB Board; Replacing the Touchpad Bracket

Chapter 3 95
Replacing the USB Board
Replacing the TouchPad Bracket
1. Replace the USB Board in the Lower Cover. 2. Insert the FFC cable in to the connector on the
Mainboard and secure the locking latch.
3. Replace the single securing screw.
1. Replace the TouchPad FFC, close the locking
latch on the connector and replace the adhesive
tape.
2. Replace the TouchPad bracket on the Upper
Cover, ensuring that the two locating clips are
correctly aligned with the bracket.