Acer Aspire 4745 - Removing the WLAN Module

50 Chapter 3
Removing the WLAN Module
1. See “Removing the Lower Cover” on page 46.
2. Disconnect the two (2) antenna cables from the WLAN Board and remove the one (1) screw to release the
WLAN Board.
NOTE: Cable placement is Black to the TR1 terminal (left) and White to the TR2 terminal (right).
3. Detach and remove the WLAN Board from the WLAN socket.
Step Size Quantity Screw Type
WLAN Board M2.0*3 1