100 Chapter 3
Main Module Reassembly Procedure
Replacing the CPU
Replacing the CPU Fan Module
1. Carefully turn the mainboard upside down (CPU
side up), and insert the CPU into the CPU bracket
as shown.
2. Using a plastic screw driver, lock the CPU in the
socket as shown.
1. Replace the Fan module on the Mainboard. 2. Lift the cover to replace the single screw located in
the back of the fan module.
3. Tighten the three captive screws on the heatsink. 4. Connect the Fan cable to the Mainboard.
To Next Page
Loading...
