44 Chapter 3
4. Lift the tab and slide the module away from the connector and remove it from the hard disk drive bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
5. Remove the two screws (H) securing the hard disk to the bracket and remove the hard disk from the
bracket.
Removing the Wireless LAN Card
1. See “Removing the Battery Pack” on page 40.
2. See “Removing the Back Cover” on page 42.
Size (Quantity) Color Torque Part No.
M3 x L4 (2) Silver 3.0 kgf-cm 86.9A554.4R0
To Next Page
Loading...
