57
Disconnect the Cables from Device
1. Disconnect the Power cable and IDE cable from the ODD.
2. Disconnect the two cables from the rear of FDD.
3. Disconnect the two SATA cables from the HDD.
Removing the ODD, FDD and HDD
1. Loosen the two screws on each side to detach the ODD.
2. Loosen the two screws on each side to detach the FDD.
3. Loosen the two screws on each side to detach the HDD.
Removing the USB Module
1. Remove the screw.
2. Detach the USB module from the chassis.
To Next Page
Loading...
