Machine Maintenance Procedures 3-15
6. Remove HDD bracket (G) from HDD (Figure 3-12).
Figure 3-12. HDD Module
HDD Module Installation 0
1. Place HDD brackets (G) onto HDD (Figure 3-12).
2. Install and secure four (4) screws (F) to HDD brackets (G) (Figure 3-11).
3. Attach HDD cable to HDD connector (E). Refer to Figure 3-11.
4. Place HDD module onto the base assembly and connect HDD module to mainboard
connector (C). Refer to Figure 3-10.
5. Connect HDD cable to mainboard connector (D) (Figure 3-10).
6. Install Base Door.
ID Size Quantity Screw Type
F M3.0*3.5 Ni 4
To Next Page
Loading...
