Acer Aspire V7-581 - Page 70

2-10 System Utilities
NOTE:
NOTE:
Password on Boot must be set to Enabled to activate the password feature.
5. Press
F10 to save changes and exit BIOS Setup Utility .
If the verification is OK, the screen will show as follows.
Figure 2-7. Setup Notice
The password setting is complete after the user presses
Enter .
If the password entered does not match the current password, the screen shows the
Setup Warning dialog. (Figure 2-8)
Figure 2-8. Setup Warning: Invalid Password
If new password and confirm new password strings do not match, the Setup Warning
dialog appears (Figure 2-9).
Figure 2-9. Setup Warning: Passwords Do Not Match