Aspire AX1470 Service Guide 19
Exit
Parameter Description
Save & Exit Setup When you have completed the system configuration changes, select this option to
leave the BIOS Setup Utility and reboot the computer, so the new system
configuration parameters can take effect. Select Save & Exit Setup from the Exit
menu and press Enter.
Discard Changes and
Exit Setup
Select this option to quit the BIOS Setup Utility without making any permanent
changes to the system configuration, and reboot the computer. Select Discard
Changes and Exit Setup from the Exit menu and press Enter.
Save Changes Select this option and press Enter to save all the changes and return to the BIOS
Setup Utility.
Load Default Settings To set this feature, select Load Default Settings from the Exit menu and press
Enter. Then, select OK to allow the BIOS to automatically load optimal defaults to
the BIOS settings. The Optimal settings are designed for maximum system
performance, but may not work best for all computer applications.
Save as User Default
Settings
Select this option and press Enter to save changes that you have made as user
defaults.
Load User Default
Settings
Select this option and press Enter to restore user defaults.
To Next Page
Loading...
