64 Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide
4. Remove the touchscreen control board.
Removing the LCD Panel
1. Remove the front bezel by following the procedure described on page 56.
2. Disconnect the LCD LVDS cable from the scaler board. Refer to step 5 on page .35.
3. Disconnect the inverter board cables. Refer to step 4 on page .41.
4. For the Aspire Z3751and Z5751 models, remove the touchscreen control board by following the
procedure described on the previous section.
5. Remove the screws securing the LCD panel.
A circuit board that is >10 cm
2
has been highlighted with a yellow rectangle as shown in the
above image. Follow local regulations for disposing this type of circuit board.
Quantity Color Torque Part Number
4 Chrome 4.5 +/- 0.3 kgf-cm 86.1A524.5R0
To Next Page
Loading...
