Acer Aspire Z5600 Series User Manual (English)

Questions and Answers:

S
Sheryl WellsAug 23, 2025
How to resolve choppy playback on Acer Aspire Z5600?
- M
  Melinda OlsenAug 23, 2025
  If you are experiencing choppy playback on your Acer Desktop, try the following: * Check that system resources are not running low: Try closing some applications. Reboot and try the operation again. * Check that the ODD controller transfer mode is set to DMA: Navigate to Start > Control Panel > System and Maintenance > System > Device Manager. Double-click IDE ATA/ATAPI controllers, then right-click ATA Device 0. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK.
M
Matthew WilliamsAug 26, 2025
How to fix no POST or video on Acer Desktop?
- L
  Lori CalhounAug 26, 2025
  If your Acer Desktop is not showing any display or going through the Power-On Self-Test (POST), consider the following steps: * First, ensure the computer is receiving power by checking if the fans start or if the status LEDs light up. * Drain any stored power by disconnecting the power cable and battery, then holding the power button down for 10 seconds. Reconnect the power and reboot the computer. * Disconnect the power and all external devices, including port replicators or docking stations. Remove any memory cards and CD/DVD discs, then restart the computer. * Reseat the memory modules. * Remove the drives.
M
Michelle WeaverAug 27, 2025
What to do if HDD is not operating correctly on Acer Aspire Z5600 Desktop?
- V
  Virginia SmallAug 27, 2025
  If the HDD on your Acer Desktop is not operating correctly, try the following: * Disconnect all external devices. * Run a complete virus scan using up-to-date software to ensure the computer is virus free. * Run the Windows 7 Startup Repair Utility. * Restart the computer and press F2 to enter the BIOS Utility. Check the BIOS settings are correct.
C
Christopher RogersAug 30, 2025
How to fix drive not detected on Acer Aspire Z5600?
- S
  smithstevenAug 30, 2025
  If a drive is not being detected on your Acer Desktop, try these steps: * Restart the computer and press F2 to enter the BIOS Utility. * Check that the drive is detected in the ATAPI Model Name field on the Information page. * Turn off the power and remove the cover to inspect the connections to the ODD. * Check for broken connectors on the drive, motherboard, and cables. * Check for bent or broken pins on the drive, motherboard, and cable connections. * Try an alternate cable, if available. If the drive works with the new cable, the original cable should be replaced. * Reseat the drive ensuring and all cables are connected correctly.
K
Kenneth WhitneySep 1, 2025
Why is my microphone not working on my Acer Desktop?
- J
  James CummingsSep 1, 2025
  If you're experiencing microphone problems with your Acer Desktop, try the following: * Check that the microphone is enabled. * Right-click on the Recording tab and select Show Disabled Devices. * If the microphone appears on the Recording tab, right-click on the microphone and select Enable. * Select the microphone then click Properties. Select the Levels tab. * Increase the volume to the maximum setting and click OK. * Test the microphone hardware.
A
Andrew HansenSep 5, 2025
How to troubleshoot general issues on Acer Desktop?
- P
  patelmiaSep 5, 2025
  For general troubleshooting issues with your Acer Desktop, consider these steps: * Check the power cable is properly connected to the computer and the electrical outlet. * Remove any extension cables between the computer and the outlet. * Remove any surge protectors between the computer and the electrical outlet. Plug the computer directly into a known good electrical outlet. * Disconnect the power and open the casing to check the Thermal Unit and fan airways are free of obstructions. * Remove all external and non-essential hardware connected to the computer that are not necessary to boot the computer to the failure point. * Remove any recently installed software.
D
David HarmonSep 7, 2025
What to do if external mouse fails on Acer Desktop?
- M
  mariabrownSep 7, 2025
  If you are experiencing issues with an external mouse on your Acer Desktop, try the following: * Try an alternative mouse. * If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. * If the mouse uses a USB connection, try an alternate USB port. * Try an alternative program to verify mouse operation. Reinstall the program experiencing mouse failure. * Restart the computer.
N
nicholaschangSep 9, 2025
How do I fix abnormal video display on my Acer Desktop?
- W
  Willie LevySep 9, 2025
  If you're experiencing an abnormal video display on your Acer Desktop, here are some steps to take: * Reboot the computer. * If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty. * If extensive pixel damage is present, the LCD is faulty and should be replaced. * Adjust the brightness to its highest level. * Check the display resolution is correctly configured.
B
Brittany DavisSep 12, 2025
Why do discs not burn properly on my Acer Desktop?
- J
  Joe HamiltonSep 12, 2025
  If discs are not burning properly on your Acer Desktop, consider these solutions: * Ensure that the default drive is record enabled: Navigate to Start > Computer and right-click the writable ODD icon. Click Properties. Select the Recording tab. In the Desktop disc recording panel, select the writable ODD from the drop down list. Click OK. * Ensure that the software used for burning discs is the factory default. If using different software, refer to the software's user manual.
M
margaretwrightSep 13, 2025
What causes drive read failure on Acer Aspire Z5600 and how to fix it?
- B
  Bruce BrownSep 14, 2025
  If you're experiencing drive read failures on your Acer Desktop, try the following: * Remove and clean the failed disc. * Retry reading the CD or DVD. * Test the drive using other discs. * Play a DVD movie. * Listen to a music CD. * If the ODD works properly with alternate discs, the original disc is probably defective and should be replaced. * Turn off the power and remove the cover to inspect the connections to the ODD. * Check for broken connectors on the drive, motherboard, and cables. * Check for bent or broken pins on the drive, motherboard, and cable connections. * Try an alternate cable, if available. If the drive works with the new cable, the original cable should be replaced.