Acer AT2230 - Chapter 3; Chapter 4 Machine Disassembly

23
Machine Disassembly
This chapter contains step-by-step procedures on how to disassemble the monitor for
maintenance.
The tools listed as below are that we may use during this procedure:
1. A proper screwdriver
2. A pair of glove
3. A pliers
4. A plastic knife
Disassembly Procedure
Disassemble the Base
1. Put the monitor on a clean soft cloth with panel facing to the table. (Fig 1)
(Fig 1)
2. Remove the screws to remove stand base. (Fig 2-3)
(Fig 2)
(Fig
3)
Chapter 4