What does S.M.A.R.T. Status BAD, Backup and Replace mean on Acer AX1400 Desktop?
This message from a S.M.A.R.T. capable hard disk indicates that it has detected an imminent failure. It's crucial to back up your data and replace the hard drive as soon as possible to prevent data loss.
What does CMOS Checksum Bad mean on Acer AX1400?
This indicates that the CMOS contents failed the Checksum check.
What does Invalid Boot Diskette mean on Acer AX1400?
A diskette was found in the drive, but it is not configured as a bootable diskette.
What does Keyboard Error mean on Acer AX1400?
This indicates that a keyboard is either not present or the hardware isn't responding when the keyboard controller is initialized.
What does Drive Not Ready mean on Acer AX1400 Desktop?
This message means that the BIOS was unable to access the drive because it indicated it was not ready for data transfer.
What does CMOS Battery Low mean for Acer AX1400 Desktop?
This indicates that the CMOS battery is running low.
What does Boot Failure mean on Acer AX1400?
This is a general message indicating that the BIOS was unable to boot from a particular device.
What does Primary Master Hard Disk Error mean on Acer Desktop?
This message appears when the BIOS is trying to detect and configure IDE/ATAPI devices during POST, and it indicates that the IDE/ATAPI device configured as Primary Master could not be properly initialized.
What does S.M.A.R.T. Capable and Status BAD mean on Acer AX1400 Desktop?
This message, originating from a S.M.A.R.T. capable hard disk, signals that the drive has detected an upcoming failure. To protect your data, immediately back it up and prepare to replace the hard drive.
General| RAM | 4 GB |
|---|---|
| Operating System | Windows Vista Home Premium |
| RAM Type | DDR2 |
| RAM Speed | 800 MHz |
| Storage | 500 GB |
| Audio | Integrated |
| Networking | Gigabit Ethernet |
| Ports | VGA |
| Ethernet | 10/100/1000 Gigabit Ethernet |
Details system features, audio, I/O ports, physical and environmental specs.
Visual system tour of front and rear components.
Overview of BIOS setup utility, navigation, and available menus for configuration.
Lists necessary tools and pre-disassembly steps for safe component removal.
Step-by-step guides for removing external and internal computer components.
Guides for diagnosing system failures using checks, error codes, and POST checkpoints.
Lists common error messages and recommended actions for hardware and system issues.
Procedures for BIOS recovery, updates, and clearing CMOS settings.
Block diagrams, mainboard layout, and connector pin definitions for system understanding.
Lists replaceable parts and detailed technical specifications for all components.
To Next Page
