Need help?Do you have a question about the Acer EH273 and is the answer not in the manual?
General| Panel type | VA |
|---|---|
| Color depth | 8 bit |
| Screen shape | Flat |
| Display diagonal | 27 \ |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Vertical scan range | 50 - 76 Hz |
| Maximum refresh rate | 75 Hz |
| Horizontal scan range | 30 - 83 kHz |
| Contrast ratio (dynamic) | 100000000:1 |
| Contrast ratio (typical) | - |
| Display number of colors | 16.7 million colors |
| Display diagonal (metric) | 68.6 cm |
| Display brightness (typical) | 250 cd/m² |
| Product color | Black |
| Market positioning | Home |
| HDMI | Yes |
| HDMI version | 1.4 |
| Panel mounting interface | 100 x 100 mm |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.32 W |
| Power consumption (standby) | 0.42 W |
| Power consumption (typical) | 32 W |
| Cables included | AC, HDMI |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 221 mm |
|---|---|
| Width (with stand) | 613 mm |
| Height (with stand) | 452 mm |
| Weight (with stand) | 5300 g |
Read carefully, keep for reference, and follow all product warnings and instructions.
Ensure monitor is attached to base, both devices are off before connecting/disconnecting cables.
Refer to qualified personnel if power cord is damaged, liquid spilled, product exposed to water, dropped, or malfunctioning.
Instructions on how to install or remove the monitor stand and base using screws.
Steps to connect VGA or HDMI cables and the monitor power cable.
Solutions for common problems like "No picture visible" in HDMI mode.
Solutions for common problems like "No picture visible" or "Unstable picture" in VGA mode.
To Next Page
