Acer G247HL User Manual (English)

Other manuals for Acer G247HL

Questions and Answers:

K
Kara GriffinJul 28, 2025
How to fix no picture on Acer Monitor?
- J
  jenniferellisJul 28, 2025
  If your Acer Monitor displays no picture, here are a few things to check: * Ensure the AC power cord is properly connected to the monitor. * Verify the video signal cable is securely connected to the back of the monitor. * Confirm that the computer system is powered ON. * Check the power switch. Also, using the On-Screen Display (OSD) menu, try adjusting the brightness and contrast to their maximum levels or reset them to the default settings.
A
April ThorntonAug 5, 2025
What to do if there is no sound on Acer Monitor?
- R
  Robin BaileyAug 6, 2025
  If you're experiencing no sound or very low sound levels on your Acer Monitor, make sure the audio cable connecting the monitor to the host PC is properly connected. Also, check the volume settings on your host PC and increase the volume level if it's set too low.
S
Steven RobertsAug 16, 2025
Why does my Acer G247HL Monitor have an abnormal picture?
- P
  Phillip RodriguezAug 17, 2025
  If your Acer Monitor is showing an abnormal picture, first, verify that the specifications of your graphics adapter and monitor are compatible to avoid input signal frequency mismatch. If you are using non-standard signals, use the OSD to adjust RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION. If the full-screen image is missing, use the OSD to select another resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing the signal cable or powering off the monitor.

Acer G247HL Specifications

General

3D	-
Panel type	VA
Aspect ratio	16:9
Response time	6 ms
Display surface	Gloss
Display diagonal	24 \
Display technology	LED
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
On/off switch	Yes
USB Type-A downstream ports quantity	0
Certification	MPR II
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
AC input voltage	120 - 230 V
Power consumption (off)	0.3 W
Annual energy consumption	33 kWh
Power consumption (standby)	0.45 W
Power consumption (typical)	40 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	186 mm
Height (with stand)	411 mm
Depth (without stand)	38 mm
Width (without stand)	546 mm
Height (without stand)	329 mm
Weight (without stand)	- g