Acer H6510BD Series - Remote Control Operation; Remote Control Button Guide

5
English
Remote Control Layout
# Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 ASPECT RATIO To choose the desired aspect ratio.
3 ZOOM Zooms the projector display in or out.
4 RESYNC Automatically synchronizes the projector to the input
source.
5
Keystone
Adjusts image distortion caused by tilting projection
(±40 degrees).
Four
directional
selection
keys
Selects items or makes adjustments to your selection.
6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >
"Security" OSD.
7 VGA To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and
YCbCr (480i/576i).
8 COMPONENT To change source to Component video. This connector
supports YPbPr.
9 S-VIDEO To change source to S-Video.
10 HDMI™;
HDMI™/DVI
To change source to HDMI™ (or DVI). (P1340W/
H6510BD only)
11 Infrared
transmitter
Sends signals to the projector.
X111/X1140/X1140A/X1240/
X1340W/P1340W
H6510BD