Hardware Specifications and Configurations 1-19
Micro SD Connector
AC input current 0.3A (RMS) Max at 115Vac / maximum load
Leakage Current 10uA Max.@ 264Vac 50Hz
Inrush current 60A Max. @230Vac, 25°C, cold start
O/P voltage:
5.35 V
Output Voltage measure at USB Output Connector
Voltage tolerance: 5.1V – 5.6V
Load Current: 0-2000mA
Item Specification
Chipset JAE ST10S008V4AR1800
Features
MicroSD memory card up to 32G (SDHC 2.0 compatible)
SD 2.0 compatible
Support hot-plug
Push-push type connector
Read Micro SD cards formatted: FAT or FAT32
Item Specification
To Next Page
Loading...
