4-3
Tests and Diagnostics 0
This chapter explains how to install the Diagnostic Test programs and use them to test the
functions of the tablet’s hardware modules.
Driver Installation 0
For installing the test program, you should install the ADB driver program for the tablet to the
Windows OS first.
Step 1:
Find the zip file named “A110_USB_driver_0605.zip” and unzip it. You may get the device
driver program in the folder just called “A110_USB_driver_0605”.
For installing the drivers correctly, please do these in the WINDOWS 7 32bit and
release all the installation programs in the root menu of the C disk.
Step 2:
Connect the tablet to the PC, then enter the Device Manager on the PC. (Right click the
“Computer” icon > select “Manage” > select “System Tools” > select “Device Manager”) And
then you may see an “Unknown device” in the right list.
Figure 4-1. Find “Unknown device”
To Next Page
Loading...
