System Updating 2-3
System Updating
Recovery Mode 0
When you need update or reset the system, you should install the system software, you may
follow the below steps to operate.
Entering Recovery Mode 0
1. Turn off the tablet
2. Put the system software in the root menu of the micro-sd card and plug it in the tablet.
3. Open the tablet.(Please operate it follow the below instruction.)
a. Press and hold the vol- button first, then almost at the same time, press the power
button and also hold it.
b. When you feel the vibration, hold the vol- button and release the power button.
Figure 2-1. The volume button and the power button.
4. When you see an android robot in the screen and it shows as the below picture, you have
enter the recovery mode successfully.
Figure 2-2. Entering recovery mode successfully.
To Next Page
Loading...
