4-9
Starting Test 0
After installing the test program, you may see the shortcut icon of the test program on the
desktop of the tablet. You can run it to start your test now.
Figure 4-12. The program can be started on the desktop.
If you cannot see the shortcut icon on the desktop, you should press
button to enter the main menu, then find the test program and start it.
Touch Panel Calibration
Before starting test, perhaps you have just change the motherboard of the tablet, so you may
need calibrating your touch screen first, the “Touch Calibrate.pak” tool can help you. Please
do as the following pictures show you.
Step 1: Install the tool
Figure 4-13. Connect your tablet to PC. Enter the adb.1 folder, find setup
TPCalibrate.bat and run it.
To Next Page
Loading...
