4-15
Press the icon Orientation to test the orientation sensor, pick up and shake the tablet PC. If
the value of “Azimuth”, “Pitch”, “Roll” changes with shaking, the program will show pass
automatically.
Figure 4-22. This program will test and show pass automatically.
5. Magnetic Field Test
Press the icon Magnetic Field to test the magnetic field sensor, pick up and shake the tablet
PC. If the value of “magnetic_x”, “magnetic_y”, “magnetic_z” changes with shaking, the
program will show pass automatically.
Figure 4-23. This program will test and show pass automatically.
6. Temperature Test
To Next Page
Loading...
