28
Projection
(X111/X1140/
X111P/
H6510BD/
P1500)
• Front-Desktop: The factory default setting.
• Front-Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
• Rear-Desktop: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
• Rear-Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
Projection
Mode (X1140A/
X1240/X1340W/
P1340W/
X1340WH/
P1340WG)
• Front: The factory default setting.
• Rear: Reverses the image so you can project from
behind a translucent screen.
Projection
Location
(X1140A/X1240/
X1340W/
P1340W/
X1340WH/
P1340WG)
• Auto: Automatically adjusts projection location of
image.
• Desktop
• Ceiling: Turns the image upside down for ceiling-
mounted projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
• Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
• Full (X1340W/P1340W/X1340WH/P1340WG/H6510BD/
P1500): The image will be displayed making full use of
the horizontal and vertical pixels.
• 4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
• 16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
• L.Box (X1340W/P1340W/X1340WH/P1340WG/H6510BD/
P1500): Keeps the original signal aspect ratio and zooms
in by 1.333 times.
To Next Page
Loading...
