4
English
2 Right-click anywhere on the desktop and select NVIDIA Control Panel. This
will open the setup Wizard if you haven’t previously set up the 3D
environment.
3 Follow the onscreen instructions to set up the 3D environment.
4Check the Enable Stereoscopic option and select the correct display device.
5 Set the refresh rate to 120Hz from the appropriate drop-down menu.
6 Press the menu button on the projector remote control to open the OSD.
Select the second menu option on the left-hand side of the window.
7 Set 3D to Nvidia 3D Vision.
To Next Page
Loading...
