Acer P7500 Series - Image Adjustment Basics; Adjusting Projected Image Height

11
English
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
1 Raise the image to the desired height angle (Illustration #1), then pull out
the stand feet into position.
2 Use Tilt adjusting wheel (Illustration #2) to fine-tune the display angle.
3 Use Lens shift control rings to move the image to the ideal position. (refer
to page 16)
1
2
Elevator feet
Tilt adjusting wheels