How to fix Acer P7505 Projector when no image appears onscreen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Then, check if the projector lamp has been securely installed. Also, make sure you have removed the lens cap and the projector is switched on.
What to do if my Acer P7505 image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 4.9 to 33.3 feet (1.5 to 10.1 meters) (WXGA series) /4.9 to 32.6 feet (1.5 to 9.9 meters) (1080P series) / 4.9 to 31.7 feet (1.5 to 9.7 meters) (WUXGA series) from the projector.
Why is my Acer Projector image too small or too large?
Adjust the zoom ring on the top of the projector. You may also need to move the projector closer to or further from the screen. Another option is to press "MENU" on the remote control or on the control panel, go to "Image --> Aspect Ratio" and try different settings.
How to fix slanted sides on Acer P7505 Projector image?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " on the control panel or on the remote control until the sides are vertical. Alternatively, press the "Keystone" on the OSD until the sides are vertical.
What to do if Acer P7505 Projector image is reversed?
Select "Image --> Projection" on the OSD and adjust the projection direction.
How to troubleshoot partial, scrolling, or incorrectly displayed image on Acer Projector with notebooks?
First, press "RESYNC" on the remote control or control panel. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
What to do if my Acer Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is the screen of the notebook computer not displaying my presentation on Acer P7505 Projector?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is my Acer P7505 image stretched when displaying a "widescreen" DVD title?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. * If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
How to fix unstable or flickering image on Acer P7505 Projector?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
General| Brightness | 5000 lumens |
|---|---|
| Contrast Ratio | 10, 000:1 |
| Aspect Ratio | 16:10 |
| Display Technology | DLP |
| Input Connectors | HDMI, VGA, Composite Video, S-Video |
| Output Connectors | VGA, Audio Out |
| Native Resolution | 1920x1200 (WUXGA) |
Instructions for safely powering down the projector before performing cleaning procedures.
Guidelines for safely connecting and disconnecting the projector's power supply unit.
Ensures the power outlet is easily accessible for safe disconnection of the equipment.
Information and warnings regarding the safe operation of the projector with electrical power.
Guidance on when to refer servicing to qualified personnel and not to attempt self-repair.
Important safety instructions and environmental considerations for projector operation.
Advice on protecting hearing by adjusting volume levels appropriately during use.
Guidance on environmentally responsible disposal of the electronic device, encouraging recycling.
Information regarding mercury content in lamps and proper disposal procedures.
Key operational guidelines and best practices for using the projector effectively.
Essential warnings, precautions, and maintenance advice to maximize the projector's lifespan.
Details on the key capabilities and advanced technologies integrated into the projector.
List of all items included with the projector and instructions for checking completeness.
Identification of external components and their functions on the projector body.
Visual identification of front and upper side components of the projector.
Description of the buttons and indicators on the projector's control panel.
Diagram and explanation of the buttons and functions on the projector's remote control.
Step-by-step guide on how to connect various input sources to the projector.
Instructions for powering the projector on and off, including status indicators.
Detailed steps to power on the projector and connect it to a source.
Detailed steps to properly shut down the projector and its cooling cycle.
Methods for physically adjusting the projector's height and display angle.
Using elevator feet and tilt wheels to set the desired image height and angle.
Table and guide for finding optimal screen sizes at specific projection distances.
Guidance on achieving desired image sizes using distance and zoom adjustments.
Using lens shift rings to adjust the projected image position horizontally and vertically.
Onscreen display (OSD) for projector installation, maintenance, and settings.
Navigating and using the projector's OSD menus for image adjustments.
Adjusting color settings such as display mode, wall color, brightness, and tint.
Settings for image projection mode, aspect ratio, sharpness, and position.
Configuration options for startup screen, source lock, closed caption, and LAN/WiFi.
Projector management features like ECO mode, high altitude, timer, and lamp settings.
Controls for volume, mute, and notification sounds for projector operations.
Settings for enabling and configuring DLP 3D functionality and 2D to 3D conversion.
Selecting the preferred display language for the projector's multilingual OSD menu.
Guide to diagnosing and resolving common problems with the projector's image and operation.
Lists supported resolutions and frequencies for VGA and HDMI PC signals.
Explanation of LED indicators and alarm messages for projector status.
Procedure for cleaning or replacing the projector's dust filters to ensure proper ventilation.
Step-by-step instructions for safely replacing the projector's lamp module.
Instructions for securely installing the projector using a ceiling mount kit.
Technical details and performance characteristics of the projector model.
FCC compliance, Canadian regulations, and general safety notices for the device.
To Next Page
