Acer PD116P - Image (Computer Mode)

English...
22
Image
(Computer Mode)
User Controls
Keystone
Adjust image distortion caused by tilting projection. ( 15 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
4:3 : The input source will be scaled to fit the projection screen.
16:9 : The input source will be scaled to fit the width of the screen.
Auto : Keep the image with original width-higth ratio and
maximize the image to fit native horizontal or vertical pixels.
16:9 Image Postion
Press the to choose the image position showed on top,
center, or bottom.
H.Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V. Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.